BenchMount Trim Router Table — Phenolic & Aluminum Build
Expected To Ship Early September 2026.
"The team has put a lot of thought into this product and I think it's a beautiful design. Simple, easy, small. Attaches to your workbench. This thing isn't going anywhere."
When you come into the shop, you want equipment that earns its keep. Not another bulky setup that takes up space, collects dust, and is a pain to haul around. If you're working out of a smaller shop or a garage where every inch of space matters, why sacrifice space to a benchtop router table that wobbles or a full-sized table that never leaves the floor?
The TrimFit Pro® BenchMount Router Table handles chamfers, roundovers, edge work, and the small jobs that come up constantly. It stays rock-solid while you work, without ever asking for a permanent spot on your bench. Mounts in seconds when you need it. Stores out of the way when you don't.
- Ships pre-assembled and ready to mount
- CNC-machined phenolic top resists chipping, heat, and impact
- Anodized aluminum track, T-bars, and knobs hold tight tolerances
- Integrated dust port fits Festool, Cen-Tec, and Rockler hoses
- Phenolic-faced Baltic birch mounting bracket handles moisture and wear
- DeWalt - DWP611 and DCW600B
- Makita - RT0701C, XTR01Z, and GTR01Z
- Milwaukee - M18 FUEL 2723-20
- Ridgid - R2401, R860443B, and R860444B
- Ryobi - PBLRR01, P601 and PCL424B
- Bosch - PR20EVS and GKF125CE (Corded)
- Kreg - KPTRT025A
Installation Video
FREQUENTLY ASKED QUESTIONS
The phenolic plates are brand and model specific for a perfect fit. DeWalt, Makita, Milwaukee, Ridgid, Ryobi, Bosch, and Kreg are all offered, each with a mounting pattern made for that exact router. We don’t offer "swiss cheese" universal plates.
Not currently, though we're actively working on a dedicated fence design for this router table. This router table was designed first for portability and fast on/off mounting.
In the meantime, the phenolic top ships with tapped holes (the same ones used for the dust hood) that double as mounting points for a DIY fence. Add your own slotted fence stock and lock it down using those holes.
Your router's fixed base stays mounted to the table.The motor slides out of the fixed base for bit changes, then slides back in when you're ready. No unmounting required.
No, everything needed is included, right down to stainless steel M4 truss head machine screws for a more secure router mount. (Some routers ship with small-head M4 screws; ours give you a better grip.)
The aluminum extrusion mounts with 6 wood screws directly into your bench. Drill pilot holes and drive them in.
Use the included mounting clips to get perfect spacing so the router table sits flush with your workbench.
You only need about a 12"x3" surface area. A standard 2x4-framed workbench works great.
The extrusion, with its two T-track slots, stays mounted to your bench permanently. Two T-bars on the table's mounting bracket slide into those slots and lock in with 4 knobs. Loosen the knobs and the whole table slides right off for storage.
Large floor-standing router tables are great for large bits and big boards, but they can be cumbersome for every-day edge profiling. Oftentimes they just become another table surface collecting miscellaneous items. This Trim Router Table is meant to supplement an existing router table or is a great first router table.
This Trim Router Table takes up almost no room at all. All you need is the surface of your workbench to mount the aluminum extrusion. Then, you slide in the router table when you want to use it and slide it off and tuck it under your workbench when you don’t need it.
Anywhere you're currently freehanding a router, this makes it safer and more accurate — flush trims, edge profiles, roundovers. You run the wood through the router instead of running the router through the wood, which frees up the hand you'd normally use to hold the router.
No, the TrimFit Pro® BenchMount Trim Router Table does not include a router.
CNC-Machined Phenolic Top
Compact laminate — the same material used in commercial router tables and jigs. Resists chipping, cracking, and heat over years of use.
Custom Hardware
Anodized Aluminum Extrusion, T-bars, and knobs are all heavy-duty anodized aluminum. Holds tight tolerances through years of clamping and adjustment.
Dust Control
A new 3D-printed dust chute that is easy to install using the stainless steel thumb screws. Connect a shop vac and go.
SPECIFICATIONS
MATERIAL
CNC-machined phenolic (compact laminate). Impact and heat resistant, dimensionally stable.
Custom heavy-duty anodized aluminum extrusion, dual T-track slot.
Anodized aluminum T-bars & knobs (qty. 4).
Baltic birch plywood core with a phenolic face for moisture and wear resistance.
3D-printed integrated chute, sized for popular vac hose connection from Festool, Cen-Tec, and Rockler.
M4 truss head machine screws included.
6x wood screws — approx. 3" of clear bench surface required.
DeWalt, Makita, Milwaukee, Ridgid, Ryobi, Bosch, and Kreg.
Phenolic table top; aluminum extrusion track; 2x aluminum T-bars; 4x aluminum knobs; phenolic-faced mounting bracket; 3D-printed dust port; all mounting & assembly hardware.
Ships pre-assembled. Bench mount only.
TRUSTED BY 30,800 YOUTUBE SUBSCRIBERS
We're a small, family-run business dedicated to manufacturing quality tools and accessories for fellow woodworkers and DIYers. We have big hopes to grow, and we deeply appreciate the support we've received from every customer and the wider woodworking community.
GENERAL FAQs
Check out the most common questions our customers asked. Still have questions ? Contact our customer support.